Old smartphones (Pocket PC, Windows Mobile 5 and 6) can be purchased at very low price, and even if old, are really powerful. In addition, you can write and distribute your own applications / games for free, being not in the slavery of “App Markets” of any sort.
In 2009 summer (August and September), I was in France for a “sabbatic” time. I was in city of Albi, relatively far from the sea and the “usual” way to spend summer time (swimming or walking or looking for funny alternatives). France is fantastic for restaurants, aperitives and wine, so that period was very creative for me. The best “fuel” for brain are good food and wines ; if you add that I was are completely alone and without any job duty, you can understand that such condition was very near to the perfection.
Now, here is the electric diagram of this device. There are 3 relays, the microcontroller (ATMEL ATtiny2313) , one serial interface for PC connection and analog circuitry to get sounds (thru microphone) and convert them to digital data, by means of specialized decoder IC.
Using this circuit, you can activate / deactivate 3 relays with the DTMF tones emitted by your smartphone / PocketPC. In the downloadable file ef161.zip you can find:
– schematic.pdf , the electric diagram
– dtmf.hex , the Intel-Hex formatted file to burn the micro
– fuses.txt , the fuses configuration used for microcontroller in this application
If you want to take a look at the C source file, click this link…
Someone asked me how to indepently control two motors (running CW and CCW) with 3 relays, so here is a state table:
ABC | motor status (0=relay off,as shown in figure; 1=relay ON) --- | --------------------------------------------------------- 000 | M1 & M2 stop 001 | M1 stop, M2 run clockwise 010 | M1 run clockwise, M2 stop 011 | M1 & M2 run clockwise 100 | M1 & M2 run counterclockwise 101 | M1 run counterclockwise, M2 stop 110 | M1 stop, M2 run counterclockwise 111 | M1 & M2 stop
and a MAD (manually assisted design) schematic…
You can generate DTMF tones directly with your phone keyboard (setting DTMF as default sound for keys) or can use my own program dtmfremote_cab.zip. This one is supplied as CAB compressed in ZIP with a password. Such strange arrangment comes from limitations of the hoster to uploading of executable files. When you download the file, you have to unzip it (the password is: eficara) and then you have the dtmfremote.cab that can be directly installed on your WM5 or WM6 device. Note that my Samsung WM6 phone has a full qwerty keyboard, but not a touch screen, so all the commands are activated using the cursor keys and the OK button. You can also activate a sequence of pre-recorded commands ; such sequence has to be stored in a file called sequence.txt , that must reside on the same working directory of the executable. You can create / edit such file with the default Notepad. On every text row there are two numbers, comma separated (no spaces, please). First number is the bitmap of the 3 relays, so can be a number from 0 to 7 ; a number greater than 7 indicates the end of the sequence (it will loop again from the first row). The second number is the time to wait after setting the relays, prior to jump to next sequence step. This number is expressed in mS (milliSeconds) and can range from 100 to 9999. Lower numbers can’t work, ‘cause the DTMF tone needs for a minimal time to be correctly decoded by hardware.
I also wrote another program to play DTMF, using the free tool FBA Creator ; this application is called fba_dtmf_cab.zip (as usual, is a zipped CAB with password ; you must unzip it using password eficara and have your fba_dtmf.cab ready to be installed on WM5 or WM6 device). The only difference with the previous program (written in PPL) is that the sequence player isn’t included, but the whole working directory, with sources (LUA language) can be downloaded and modified with the FBA tool. IMPORTANT NOTE: if you download and install “FBA the Creator” on Win7 or newer, please create a shortcut to the executable and set this shortcut to be executed by default as administrator. If you don’t do that and launch the executable without administrator rights, you can experience a recursive pop-up error window, that’s very hard to stop. This is just a little problem in a big, genial software, written by an italian author some years ago (in the times of WinXP). Note that all the IDE sources for FBA are also downloadable from the main site. If you look in the forum, you can find some old post by user robotop ; it’s me…
Here is a short presentation video for the FBA IDE I made some time ago for my friends. It’s in Italian, but may be useful just to take a look at the working environment and how it’s easy and powerful (and free…)
Finally, here is the full working folder (sources and resources) of the DTMF program written under the FBA environment. After downloading the file FBA_folder_dtmf-remote.zip, you must expand it in a directory ; I suggest a new folder under documents, named FBA with subfolders for this and (may be) your future apps. At this point, if you have the FBA environment installed on your PC, just click the file dtmfrem.fbp to start the IDE and… happy mobile phone programming 🙂
View a short video of this application running in the IDE default emulator…